CHANNEL PLUS 2133 I/R Remote Target |
 enlarge | Brand: Channel Plus
Category: CE
List Price: $79.14
Buy New: $37.24
You Save: $41.90 (53%)
New (31) from $37.24
Avg. Customer Rating:  3 reviews
Media: Electronics
Autographed: No
Memorabilia: No
Shipping Weight (lbs): 1.5
Dimensions (in): 5 x 1 x 3
Legal Disclaimer: Warranty does not cover misuse of product.
MPN: MPT2133
UPC: 782644002984
EAN: 0782644002984
ASIN: B00006JPE5
Availability: Usually ships in 1-2 business days
|
|
Features:
| • | Coax in/out | | • | Use with 3025, 3425, 3445, 3515, 8200 |
|
|
Accessories:
|
|
Similar Items:
|
|
Editorial Reviews:
Product Description
CHANNEL PLUS 2133 Whole-House Infrared Remote Control Receiver Infrared control target ; 5V system ; For use with MPT3015, MPT3025 ;and/or DA8200 systems ; In-line coaxial cable connection using standard F termination Whole-House Infrared Remote Control Receiver
|
|
Customer Reviews:
 Not a set top product- poor noise immunity October 7, 2008
1 out of 1 found this review helpful
I purchased three of these "set top" 5V IR targets for use with a channel plus video distribution system to allow remote access to my Directv DVR's. All three would not function when attached to the side or top of three different tv's. Apparently the noise generated by the tv was propagated through the device onto the video IR channel which overwhelmed the IR signal from IR remote controls no matter how close they were to the targets.
Since all of the tv's were wall mounted on swiveling stands I found that if I suspended the targets at least 6 inches below the steel stand base plates the noise was shielded enough for the IR remotes to function.
The manual for the channel plus 8200 amplifier indicates that noise may be a problem for the targets but this is the only place you will find it mentioned.
If I had it to do over again I would probably order the channel plus 12V IR system including targets and wall mounted interfaces. I do not know if it would perform better but guess that the higher voltage may give the system better noise immunity. Another fine Chinese product bites the dirt.
 The Ultimate Luxury April 11, 2007
1 out of 1 found this review helpful
We already had one of these working in the office. Now the bedroom is operational. Couldn't have been easier.
 Receives infrared signals from your existing remote control October 19, 2005
2 out of 2 found this review helpful
This unit goes between your TV and your 3025 distribution amplifier. The unit works great as long as you don't have a signal splitter between the TV and the 3025 since splitters apparently cancel the signal. I took off one star because of this limitation.
Don't forget to also order the CHANNEL PLUS 2173 Single Head I/R Remote Control Emitter/Repeater to hook up between the 3025 and the
device that you wish to control.
|
